Struck at BIOS screen is the most common problem after BIOS update. Many people face this issue after BIOS update to 0099 version for the Intel DH61BE, DH61CR, DH61DL, DH61WW, DH61SA, DH61ZE series motherboards.
Recently I have faced the same type of problem but I have managed to solve it. My motherboard is Intel DH61SA classic series and my motherboard's BIOS version was 0048.
If your BIOS version is 0048 and you are trying to update it to latest 0120 version then first you have to update it to 0099 version and only then you can update it to latest BIOS version 0120. (As per Intel's BIOS Update release Notes)
I prefer F7 BIOS Flash Update. I downloaded the two BIOS update files from Intel's website namely be0099.bio and be0120.bio files. I used a FAT32 formatted pendrive for this purpose. I copied the be0099.bio and be0099.bio files in the pendrive. File be0099.bio is used to update the BIOS to version 0099 and be120.bio is used to update the BIOS to version 0120.
First connect your pendrive to a USB port and restart the computer. In the BIOS start-up screen, select BIOS update option by pressing F7 and then select the pendrive and then choose be0099.bio file for BIOS update. After successful BIOS update restart your computer and in my case, my computer struck at BIOS screen after restart. Only BIOS settings was accessible but my computer was not booting into operating system.
What you have to do now is to restart your computer again and from the BIOS screen press F7 for BIOS update. Then select your pendrive and choose the latest be0120.bio file for another update. There might be two cases:
1. Successful BIOS update and booting computer into Operating System.
or 2. Failed BIOS update and erroneous BIOS.
In my case, it was the 2nd case.
What you should do for the 2nd case?
Answer: Just shut down your computer and unplug power cable. Then open your computer case and find the 3 pin jumper on your motherboard. Remove the jumper and then power on your computer (your pendrive must be connected to the USB port). An automatic BIOS recovery will start and wait till it completes.
Then shut down your computer and remove the pendrive. Then put the jumper back to it's original location on your motherboard. After that restart your computer.
And then finally, I have repaired my BIOS and my computer booted into OS.
If you like this post, you can follow MyCoolFundas on Twitter, Like MyCoolFundas on Facebook or subscribe our Youtube Channel for instant updates. Email: snpmath@gmail.com
30 comments:
thanks its working
Muchas gracias por tu aporte amigo, sin embargo, mi problema es algo particular, espero puedas ayudarme. Mi placa base es una Intel DH61CR y he logrado actualizar la BIOS a la versión 0099 tal como lo indican las líneas en la página de intel. Ahora lo que no he podido lograr es actualizar la BIOS a la versión 0120, con ninguno de los 3 métodos dispuestos en la página. Realizando el procedimiento que describes al final puedo lograr esto? puedo actualizar mi BIOS a la última versión 0120? lo necesito ya que estoy teniendo problemas específicamente con el audio (soy músico) y lo necesito, sé que la actualización de la BIOS corrige muchos de estos inconvenientes. Ayúdame a actualizar mi BIOS a la última versión 0120 please, te lo agradezco enormemente de antemano. Saludos...!
Thanks a lot ! I had to reactivate AHCI on secondary SATA and yabadabadoom: success
Thank You!!!!
thanks , it worked!!!
I am not accessible my bios
It shows blank screen
Hello myself Abzee i tried just the way you told but it did not work with me my mother board is dh61ww so how can i fix this.
at first i was updated by bios.EXE then my system restarted and entered in to bios update but after few sec my pc restarted before the process is completed and when i open boot menu it show bios version is 0099 but it stucks in boot menu only, so please help me to solve this.
I'm literally crying ;_; without your comment I would have been stuck forever. A million thanks kind sir
The only way to rectify this if above method fails is by visiting a local motherboard repair guy who will replace your bios chip and then update it till 048 only....
Thanks man! This helped me a lot!!!
Dear Mr. Siddhartha Narayan Pal, this help me a lot!
Many, many thanks for sharing this ..!!
Martin
Awesome, worked! I have DH61WW Board and needed this bios update for an RX470 no display issue. Note the bios time and date need to set correctly also and IDE sata tweeks if necessary. Thanktyou.
bonjour cela m est arrivé j ai cree une cles usb avec rufus j ai installé freedos .img et le bios 0116 jumper retiré redemarrage avec la cles usb et successfull precision sans freedos echec
First, didn't work for me. I tried sveral times. I also don't think the bios reset using cmos jumper is working for me because my time is not resetting. It only resets if cmos battery is taken out. I see it worked for many of y'all. But for me it didn't. Still stuck at the intel page.
ALLAH SENDEN RAZI OLSUN SONUNDA OLDU
Thank you...genius
G+
Thank you...
Blockchain two-factor authentication is the main ingredient of the exchange as it plays a role of protecting your device from hacking attempts and many more. If you’re looking for ways to handle two-factor authentication error, always get in touch with the team who is there to assist you. You can call on Blockchain customer support number which is always functional and users can talk to the team anytime for availing fruitful results which are easy to execute.
Just amazing, thank you so much for the solution!
The only solution which I've found to work. Thanks.
Hi! Thx!great work. But now (22/11-19) intel removed all old bios updates. Anyone know how to find it for Intel DH61WW? Br JG
Anyone still have the be0120.bio file? I'm stuck after using the express method to upgrade from 0048 to 0099. Intel no longer have it available for download. >:
Solved...was able to find BE0120.BIO from https://rebyte.me/en/intel/44157/file-290681/, which works like a charm. Hope not virus... :D Btw, don't even bother with the first option as that was unable to read the file so just go straight to the recovery bios method with the jumper removed. Able to boot into OS now.
I have tried to flashing BE0120.BIO using recovery BIOS method with the jumper removed...but still stuck at the BIOS screen and it doesn't boot into os.
Anyone can help me?
This solved my problem. Thank you for posting the step-by-step instructions on how to do this.
Here are some tips for anyone doing this, which are based on my own experiences and reading of Intel's documentation (which they've removed from their web site):
1. Place your BE0120.BIO file in the root directory
2. Make sure there aren't any other .BIO files present
3. Only upgrade from BIOS version 99 or newer
If your BIOS version is earlier than version 99, get it upgraded to BE0099.BIO first, or else the upgrade won't work because version 99 is a pre-requisite for all BIOS updates newer than version 99.
I have the same problem now. I updated to 0120 but still stuck at BIOS screen . Have you solved it? Please let me know what happened to you. Thanksa
Thank you so much sir.
Thank you! I have successfuly updated from 0099 to 0120
What do you mean bu IDE sata tweeks?
Solved: Stuck At The Bios Screen After Update Bios Version 0099 >>>>> Download Now
>>>>> Download Full
Solved: Stuck At The Bios Screen After Update Bios Version 0099 >>>>> Download LINK
>>>>> Download Now
Solved: Stuck At The Bios Screen After Update Bios Version 0099 >>>>> Download Full
>>>>> Download LINK
Post a Comment